Comanche 4WD L6-242 4.0L VIN S MFI (1992)
Door Sensor/Switch (For Alarm): Service and Repair
REMOVAL
Power Window/Lock Control Panel
1. Remove the interior door latch release assembly and control panel retaining screws.
2. Disconnect the control linkage and the wire harness connector.
3. Remove the latch release and control panel assembly.
4. Remove the armrest lower retaining screws.
Armrest Retainer Clip
5. Swing the armrest downward to a vertical position. This is necessary to disconnect the armrest from the upper retainer clip.
6. Pull the armrest straight out from the trim panel.
Trim Panel Removal
