Comanche 4WD L6-242 4.0L VIN S MFI (1992)
Oil Pan: Service and Repair
Fig. 16 Oil Pan & Pump
1.
Disconnect battery ground cable.
2.
Raise and support vehicle, then drain oil pan.
3.
Disconnect exhaust pipe at manifold, then remove hanger at catalytic converter and allow pipe to drop to floor, if necessary.
4.
Remove starter motor, then the transmission housing inspection cover.
5.
Remove oil pan retaining bolts, then the oil pan and gaskets.
6.
Reverse procedure to install. Tighten oil pan retaining bolts to specifications.
