Comanche 4WD L6-242 4.0L VIN S MFI (1992)
Vehicle Speed Sensor: Service and Repair
NOTE:
The vehicle distance (speed) sensor is located in the extension housing of the transmission on 2WD models. It is located on the transfer case on
4WD models.
Vehicle Speed Sensor Removal/Installation
REMOVAL
1.
Disconnect the electrical connector from the sensor.
2.
Loosen the sensor nut.
3.
Remove the sensor.
INSTALLATION
1.
Install new sensor into speedometer adapter.
2.
Tighten sensor nut.
3.
Connect electrical connector to sensor.
