Comanche 4WD L6-242 4.0L VIN S MFI (1992)
Alignment: Service and Repair
Toe Adjustment
1.
Center steering gear, then lock steering wheel to hold in position.
2.
Loosen drag link sleeve clamp bolts, then turn drag link sleeve until right wheel toe is at zero position.
3.
Position bolt heads to front of vehicle, torque to 14 ft. lbs.
4.
To adjust left wheel, loosen clamp bolt at each end of tie rod.
5.
Turn tie rod until left wheel is at toe zero position.
6.
Position tie rod clamp bolt heads to rear of vehicle. Tighten to specifications.