Comanche 4WD L6-242 4.0L VIN S MFI (1992)
Ball Joint: Service and Repair
Lower Ball Joint Replacement
Fig. 4 Removing Lower Ball Joint
1.
Remove steering knuckle as previously outlined.
2.
Position receiver tool J-34503-1 over ball joint stud and adapter tool J-34503-3 onto C-clamp as shown.
3.
Tighten clamp and press ball joint from steering knuckle.
4.
To install, place tool J-34503-4 over replacement ball joint and receiver tool J-34503-2 onto C-clamp. Position tool against yoke shoulder, then
tighten clamp and press ball joint into knuckle.
5.
Install steering knuckle.
