Commander 2WD V6-3.7L (2009)
Towing Hook / Bracket: Service and Repair
Front Tow Hook(s) - Installation
INSTALLATION
Stud Plates
1. Install the stud plates (1 AND 2) through the holes in the front bumper beam.
2. Install the tow hook (1) and install the nuts (2).
3. Tighten the nuts to 68 Nm (50 ft. lbs.).
4. Install the front fascia. See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia -
Installation
