Commander 2WD V6-3.7L (2009)
Trunk / Liftgate Striker: Service and Repair
Latch Striker - Removal
REMOVAL
1. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the liftgate scuff plate to the liftgate door sill and remove the scuff
plate.
2. Mark the latch striker (1) location on the inside of the liftgate opening lower panel to aid reinstallation.
3. Remove the two screws (2) that secure the latch striker to the inside of the liftgate opening lower panel.
4. Remove the latch striker from the vehicle.
