Commander 2WD V6-3.7L (2009)
3. Install the module housing (1) and install the nut.
4. Position the modules back into the housing.
5. Install the floor console See: Console/Service and Repair/Floor Console - Installation.
6. Install the front seats See: Seats/Service and Repair/Seat, Front/Seat - Installation.
7. Install the sill covers See: Scuff Plate/Service and Repair/Scuff Plate - Installation.
8. Install the cowl trim panels See: Trim Panel/Service and Repair/Cowl Trim Panel - Installation.
9. Install the lower B-pillar trim See: Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim Panel-Installation.
10. Install the rear quarter trim panels. See: Trim Panel/Service and Repair/Luggage Compartment Trim/Quarter Trim Panel - Installation.
11. Instal the third row seats See: Seats/Service and Repair/Seat, Front/Seat - Installation.
12. Install the second row seats See: Seats/Service and Repair/Seat, Front/Seat - Installation.
