Commander 2WD V6-3.7L (2009)
4. Firmly grasp the lower end of the turning loop trim cover on the upper B-pillar and pull it straight out to unsnap it from the height adjuster, then
lift the bottom of the cover upward and pull outward to disengage the upper tabs from the adjuster.
5. Remove the screw (3) that secures the seat belt turning loop (4) to the height adjuster (5).
6. Remove the seat belt turning loop from the height adjuster and position the seat belt out of the way.
7. Using a magnetic screwdriver or equivalent, remove the upper screw and pull the upper part of the trim panel (1) away from the pillar and release
the bottom tabs (2).
C-Pillar Trim Panel-Removal