Commander 2WD V6-3.7L (2009)
Disc Brake Caliper Adapter - Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the front wheel and tire assembly.
3. Remove the caliper (1) See: Disc Brake Caliper - Removal.
4. Remove the disc brake caliper (1) from the adapter (4).
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to
hang the caliper securely.
5. Remove the inboard and outboard brake pads. See: Disc Brake System/Brake Pad/Service and Repair/Removal and Replacement/Brake Pads -
Removal.
6. Remove the caliper adapter mounting bolts (3).
Disc Brake Caliper Adapter - Installation
INSTALLATION
