Commander 2WD V6-3.7L (2009)
12. Remove the nut (1) that secures the HVAC housing assembly (2) to the passenger side of the dash panel (3).
13. Disconnect the A/C liquid line and the A/C suction line from the A/C evaporatorSee: Hose/Line HVAC/Service and Repair/Removal and
Replacement/A/C Liquid Line - Removal.
14. Disconnect the heater hoses from the heater core tubes.
15. Remove the two bolts (1) that secure the HVAC housing assembly (2) to the engine compartment side of the dash panel (3).
16. Lift the HVAC housing assembly upwards so that the condensate drain tube clears the floor panel and remove the HVAC housing assembly from
the passenger compartment.
17. If required, disassemble the HVAC housing assembly See: Overhaul/Disassembly.
Front HVAC Housing Installation
HOUSING-HVAC ASSEMBLY
NOTE: The HVAC housing must be removed from the vehicle and disassembled for service of the air inlet housing, air distribution housing
and the A/C evaporator.
NOTE: LHD model shown in illustrations. RHD model similar.