Commander 2WD V6-3.7L (2009)
Marker Lamp Bulb: Service and Repair
Position Lamp Bulb - Removal
BULB - POSITION LAMP
NOTE: The following procedure applies only to vehicles manufactured for export markets. Vehicles manufactured for North American
markets do not have a position lamp bulb, socket or wiring provided in the front lamp unit.
1. Remove the front lamp unit from the front of the vehicle. See: Headlamp/Headlamp Bulb/Service and Repair/Front Lamp Unit Boot - Removal.
2. Firmly grasp the position lamp bulb socket on the bottom of the front lamp unit housing and rotate it counterclockwise about 30 degrees to unlock
it.
3. Pull the socket and bulb straight out from the keyed opening in the housing.
4. Pull the base of the bulb straight out of the socket.
