Commander 2WD V6-3.7L (2009)
Command Valve
Each shift group possesses one command valve (3). The 1-2 / 4-5 and 2-3 command valves are installed in the shift valve housing, the 3-4 command
valve is installed in the valve housing. The command valve switches the shift group from the stationary phase to the shift phase and back again.
Holding Pressure Shift Valve
Each shift group possesses one holding pressure shift valve (1). The 1-2 / 4-5 and 2-3 holding pressure shift valves are installed in the shift valve
housing; the 3-4 holding pressure shift valve is installed in the valve housing. The holding pressure shift valve allocates the working pressure to one
actuator of a shift group.
Shift Pressure Shift Valve
