Commander 2WD V6-3.7L (2009)
Liftgate Window Glass: Service and Repair
Flip-Up Glass Latch - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the liftgate (1). See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim
Panel/Service and Repair/Liftgate Trim Panel - Removal
NOTE: Grand Cherokee (WK) shown, Commander (XK) similar.
3. Using a grease pencil or equivalent, mark the position of the latch to aid installation.
4. Disconnect the electrical connectors (1) from the liftgate glass latch (3).
5. Remove the two nuts (2) that secure the latch (3) to the inside of the liftgate.
6. Remove the liftgate glass latch (3) from the vehicle.
