Commander 2WD V6-3.7L (2009)
Window Track: Service and Repair
Rear Door Glass Channel - Removal
REMOVAL
1. Remove the watershield. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Watershield -
Removal
2. Remove the weatherstrip from the rear glass run channel (2).
3. Loosen the bolt (2) that secures the top of the rear glass run channel to the keyed hole on the inside door panel.
4. Remove the nut (4) that secures the bottom of the run channel to the inside door panel.
5. Remove the rear glass run channel from the door.
