Commander 2WD V6-3.7L VIN K (2006)
5. Disconnect the latch cable from the liftgate handle and separate the support clips.
6. Remove the three screws (2) that secure the latch (1) to the liftgate.
7. Remove the liftgate latch (1) from the vehicle.
INSTALLATION
1. Position the latch (1) onto the inside of the liftgate.
2. Install and tighten the three bolts (2) that secure the latch (1) to the studs on the inside of the liftgate.
3. Tighten the bolts to 12 N.m (9 ft.lbs).