Commander 2WD V6-3.7L VIN K (2006)
Cowl Moulding / Trim: Service and Repair
PANEL-COWL TOP
REMOVAL
1. Remove the wiper arms.
2. Remove the rear hood seal.
3. Separate the rear clips (3).
4. Remove cowl cover (2) from cowl.
INSTALLATION
Cowl Moulding / Trim: Service and Repair
PANEL-COWL TOP
REMOVAL
1. Remove the wiper arms.
2. Remove the rear hood seal.
3. Separate the rear clips (3).
4. Remove cowl cover (2) from cowl.
INSTALLATION