Commander 2WD V6-3.7L VIN K (2006)
1. Install the stud plates (1 & 2) through the holes in the front bumper beam.
1. Install the tow hook (1) and install the nuts (2).
2. Tighten the nuts to 68 N.m (50 ft.lbs).
3. Install the front fascia.
1. Install the stud plates (1 & 2) through the holes in the front bumper beam.
1. Install the tow hook (1) and install the nuts (2).
2. Tighten the nuts to 68 N.m (50 ft.lbs).
3. Install the front fascia.