Commander 2WD V6-3.7L VIN K (2006)
12. Remove the nut (1) that secures the HVAC housing assembly (2) to the passenger side of the dash panel (3).
13. Disconnect the A/C liquid line and the A/C suction line from the A/C evaporator.
14. Disconnect the heater hoses from the heater core tubes.
15. Remove the two bolts (1) that secure the HVAC housing assembly (2) to the engine compartment side of the dash panel (3).
16. Lift the HVAC housing assembly upwards so that the condensate drain tube clears the floor panel and remove the HVAC housing assembly from
the passenger compartment.
17. If required, disassemble the HVAC housing assembly.
INSTALLATION