Commander 2WD V6-3.7L VIN K (2006)
18. If required, remove the front floor air doors (1 and 3) from the center partition (2) by disengaging the retaining tabs (4) and pulling the air doors
apart from each other.
NOTE: If the seal on any air door is deformed or damaged, the air door must be replaced.
19. Remove the upper defrost/panel-air door (1), lower defrost/panel-air door (2), directional vane (3), rear outlet-air door (4) and the blend-air door
(5) from the right side air distribution housing (6) as required.
NOTE: If the seal on any air door is deformed or damaged, the air door must be replaced.
