Commander 2WD V8-4.7L (2008)
Front Bumper Cover / Fascia: Service and Repair
Bracket-Front Fascia Mounting
Removal
REMOVAL
1. Remove the fascia.See: Front Fascia - Removal
2. Remove the bolts (3).
3. Remove the push pin fasteners and remove the fascia mounting bracket (1).
Installation
INSTALLATION
1. Position the fascia mounting bracket (1) over the bumper beam.
2. Install the push pin fasteners (4) and screws (3).
3. Install the fascia. See: Front Fascia - Installation
