Commander 2WD V8-4.7L (2008)
Hood Latch: Service and Repair
Hood Latch Release
Removal
REMOVAL
1. Remove the hood latch (4) See: Hood Latch - Removal.
2. Remove release cable (2) from the three hood release cable retainers (1).
3. From inside the vehicle, remove the two screws (3) that secure the hood release handle (1) to the cowl trim panel.
4. Remove the grommet (2) from the cowl panel (1) and remove the hood release cable and handle assembly (4).
Installation
INSTALLATION
