Commander 2WD V8-4.7L (2008)
Front Cross-Member: Service and Repair
Removal
REMOVAL
1. Support engine using engine support fixture No. 8534 or equivalent.
2. Remove the front skid plates.
3. Remove the rotors. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake
Rotor - Removal
NOTE: Do not twist the boot anytime during removal or installation.
4. Remove the outer tie rod end (2) nut (1) from the ball stud.
5. Separate the outer tie rod end (3) from the knuckle with puller tool No. 8677 (5).
