Commander 2WD V8-4.7L (2008)
1. Disconnect the electrical connector (1), if equipped, and the vent hose (2).
2. Remove the right halfshaft.
3. Separate the propeller shaft as necessary, and position out of the way. See: Transmission and Drivetrain/Drive/Propeller Shafts, Bearings and
Joints/Drive/Propeller Shaft/Service and Repair/Removal and Replacement/Propeller Shaft - Removal
4. Drain the differential.
5. Support the differential with a suitable lifting device.
6. Remove the front differential front bolts.
7. Remove the differential right bolt.
