Commander 2WD V8-4.7L (2008)
Rear Cross-Member: Service and Repair
Rear Body Cradle - Installation
INSTALLATION
1. Install the cradle and install the rail bolts (4).
2. Align the cradle to the marks made previously.
3. Tighten the bolts (4) to 108 Nm (80 ft. lbs.).
4. Install the side cradle bolt (1).
5. Tighten the bolt (1) to 108 Nm (80 ft. lbs.).
6. Install the upper cradle bolts (2).
7. Tighten the bolts (2) to 102 Nm (75 ft. lbs.).
8. Connect the exhaust hangers (1 and 2).
9. Attach the track bar (1) and install the outer bolt (3) and nut (2).
