Commander 2WD V8-4.7L (2008)
Glove Compartment: Service and Repair
Instrument Panel Glove Box - Removal
REMOVAL
1. Separate the glove box damper rod (1) from the clove box by sliding the rod towards the rear of the vehicle to release it from the bin.
2. Open the glove box and carefully use fingers to press down glove box open stops at the top of the bin, downward to allow the glove box to rotate
toward the carpet.
3. Rotate the box down and release the door hinges (2) at the bottom and remove the glove box.
