Commander 2WD V8-4.7L (2008)
REMOVAL
1. Remove the trim plug (1) from the upper b-pillar trim (2).
CAUTION: The upper trim plug must be removed and discarded to gain access to the upper retaining screw before attempting to remove
the trim panel. Failure to remove the trim screw may result in damage to the trim panel or the retaining clip.
2. Using a small drill (2) approximately 3 mm (7/64"), drill a hole into the trim plug (1).
3. Using a hook type tool (1) or equivalent, remove and discard the trim plug (2).
