Commander 2WD V8-4.7L (2008)
Power Seat Switch: Testing and Inspection
POWER SEAT SWITCH
DRIVER WITHOUT MEMORY SEAT SYSTEM
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat See: Service and Repair/Power Seat Switch - Removal.
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to DRIVER POWER SEAT SWITCH WITHOUT MEMORY SEAT
SYSTEM CONTINUITY table. If not OK, replace the faulty power seat switch. If switch tests OK, refer to Power Seat Adjuster testing See:
Testing and Inspection/Component Tests and General Diagnostics/Power Seat Adjuster.
PASSENGER SEAT
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat See: Service and Repair/Power Seat Switch - Removal.
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to PASSENGER POWER SEAT SWITCH CONTINUITY table. If not
OK, replace the faulty power seat switch. If switch tests OK, refer to Power Seat Adjuster testing See: Testing and Inspection/Component Tests
and General Diagnostics/Power Seat Adjuster.
