Commander 2WD V8-4.7L (2008)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Installation
INSTALLATION
NOTE: There are different instrument panel switch pods available based on the option content of the vehicle. Ensure the switch pod being
installed matches the vehicle options.
1. Position the lower instrument panel switch pod into the instrument panel center bezel.
2. Install the lower instrument panel switch pod fasteners.
3. Install the instrument panel center bezel, See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Center
Bezel - Installation.
4. Connect the battery negative cable.
5. Verify heated seat system operation.
