Commander 2WD V8-4.7L (2008)
DRIVER WITH MEMORY SEAT SYSTEM
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat See: Service and Repair/Power Seat Switch - Removal.
3. Use an ohmmeter to test the resistance of the power seat switch. Refer to DRIVER POWER SEAT SWITCH WITH MEMORY SEAT SYSTEM
CONTINUITY table. If not OK, replace the faulty power seat switch. If switch tests OK, refer to Power Seat Adjuster testing See: Seats/Testing
and Inspection/Component Tests and General Diagnostics/Power Seat Adjuster.
