Commander 2WD V8-4.7L (2008)
NOTE: Take the proper precautions to protect the face of the instrument panel from cosmetic damage while performing this procedure.
FRONT FLOOR DUCTS
NOTE: Illustration shown with instrument panel, gear selector and console duct removed for clarity.
1. Remove the instrument panel from the passenger compartment See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Instrument Panel - Removal.
2. Disconnect the right front floor duct (5) and the left front floor duct (6) from the rear of the air distribution housing (4) and remove the front floor
ducts from the vehicle.
REAR FLOOR DUCTS
3. Remove the floor console from the passenger compartment See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Floor
Console - Removal.
4. Remove the front seats See: Body and Frame/Seats/Service and Repair/Seat - Removal.
5. Disengage the retainer (1) that secures the front console duct (2) to the gear selector (3).
6. Disconnect the front console duct from the air distribution housing (4) and remove the console duct.
7. Remove the screws (5) that secure the gear selector to the floor panel (6) and position the gear selector out of the way.