Commander 2WD V8-4.7L (2008)
Center Mounted Brake Lamp: Service and Repair
Center High Mounted Stop Lamp - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the two screws (6) that secure the Center High Mounted Stop Lamp (CHMSL) (8) to the liftgate header panel (1).
3. Pull the CHMSL (1) away from the liftgate far enough to access and disconnect the wire harness connector (2) and the rear washer supply hose (3)
from the lamp.
4. Remove the CHMSL from the liftgate.
