Commander 2WD V8-4.7L (2008)
Horn Switch: Service and Repair
Removal
REMOVAL
WARNING: On vehicles equipped with airbags, refer to restraints before attempting any steering wheel, steering column, or instrument panel
component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal
injury.
1. Disconnect and isolate the battery negative cable.
2. Remove the trim cover from the driver side airbag. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Airbag - Removal.
3. Remove the horn switch (2) and tray (6) as a unit from the pouch on the retaining strap of the driver side airbag (5).
