Commander 2WD V8-4.7L (2008)
Pressure Regulating Solenoid: Service and Repair
Removal
REMOVAL
NOTE: If the Transmission Solenoid/TRS Assembly is being replaced, the Quick Learn Procedure must be performed. See: Relays and Modules
- Transmission and Drivetrain/Relays and Modules - A/T/Control Module/Service and Repair/Procedures/TCM Quick Learn
1. Remove the valve body from the transmission.See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Removal and Replacement/Removal
2. Remove the bolts (1) holding the transmission solenoid/TRS assembly onto the valve body.
3. Separate the transmission solenoid/TRS assembly from the valve body.