Commander 2WD V8-4.7L (2008)
5. Disengage the two plastic retainers (7), then the hook (8) that secures the side curtain airbag front tether to the inner A-pillar.
6. Remove the eight screws (3) that secure the side curtain airbag channel (4) to the box nuts (1) in the inner roof side rail.
7. Disengage the two plastic push-in fasteners (6) that secure the channel to the roof side rail above the B-pillar.
8. Remove the two screws (5) that secure the inflator mounting bracket to the U-nuts (2) in the roof side rail between the B and C-pillars.
9. Disengage the integral hook on the inflator from the locating hole in the roof side rail.
10. Remove the side curtain airbag from the vehicle as a unit.
