Commander 2WD V8-4.7L (2008)
Seat Belt: Description and Operation
Description
DESCRIPTION
The seat belt retractors used in all seating positions include an inertia-type, emergency locking mechanism as standard equipment. However, the retractor
locking mechanisms for all second and third row seating positions are mechanically switchable from an emergency locking retractor to an automatic
locking retractor. The primary function of this feature is to securely accommodate a child seat in any of these seating positions of the vehicle without the
need for a self-cinching seat belt tip half latch plate unit or another supplemental device that would be required to prevent the seat belt webbing from
unwinding freely from the retractor spool of an inertia-type emergency locking retractor mechanism.
The automatic locking mechanism is integral to the seat belt and retractor unit and is concealed beneath a molded plastic cover located on one side of the
retractor spool. The automatic locking mechanism cannot be adjusted or repaired and, if ineffective or damaged, the entire seat belt and retractor unit
must be replaced.
