Commander 2WD V8-4.7L (2008)
24. Reconnect the battery positive cable terminal clamp (4) to the battery positive terminal post. Tighten the terminal clamp pinch-bolt hex nut to 5.5
Nm (50 in. lbs.).
25. Secure the battery positive cable terminal clamp cover (3) over the battery positive cable terminal clamp (4).
26. Reconnect the battery negative cable terminal clamp (2) to the battery negative terminal post. Tighten the terminal clamp pinch-bolt hex nut to 5.5
Nm (50 in. lbs.).
27. Apply a thin coating of petroleum jelly or chassis grease to the exposed surfaces of the battery cable terminal clamps and the battery terminal
posts.
