Commander 2WD V8-4.7L (2008)
5.7L
WARNING: Disconnect negative cable from battery before removing battery output wire (B+ wire) from generator. Failure to do so can result
in injury or damage to electrical system.
1. Disconnect negative battery cable at battery.
2. Remove generator drive belt.
3. Unsnap plastic insulator cap from B+ output terminal.
4. Remove B+ terminal mounting nut at rear of generator. Disconnect terminal from generator.
5. Disconnect field wire connector (3) at rear of generator by pushing on connector tab.
6. Remove 2 generator mounting bolts (1).
7. Remove generator (2) from vehicle.
