Commander 2WD V8-4.7L (2008)
Keyless Start Antenna: Service and Repair
Installation
INSTALLATION
The Remote Start Antenna Module Assembly consists of an electrical connection to the WCM/SKREEM (1), a length of coax cable (2), mounting clips
or tie wraps (3) and (4), and a control module/antenna (5).
1. Route coax cable (2) through openings on instrument panel.
2. Position module (3) to IP mounting pins (2). Module snaps on.
3. Connect coax cable electrical connector (2) to WCM/SKREEM (1).
