Commander 2WD V8-4.7L (2008)
4. Tighten the front differential front bolts to 54 Nm (40 ft. lbs.).
5. Install the propeller shaft as necessary. See: Transmission and Drivetrain/Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair/Removal and Replacement/Propeller Shaft - Installation
6. Install the right halfshaft onto the differential.
7. Connect the electrical connector (1) (if equipped) and the vent hose (2).
8. Install the lower clevis bolts and tighten to 169 Nm (125 ft. lbs.).
