Commander 2WD V8-4.7L (2008)
Transmission Cooler: Removal and Replacement
Transmission Oil Cooler - Removal
REMOVAL
1. Remove grille See: Body and Frame/Grille/Service and Repair/Grille - Removal.
2. Using Tool 8875A, disconnect transmission cooler tubes and power steering lines from the transmission oil/power steering cooler See: Steering
and Suspension/Steering/Power Steering/Power Steering Fluid Cooler/Service and Repair/Power Steering Fluid Cooler - Removal
3. Remove the transmission cooler mounting bolts.
4. Remove transmission cooler from vehicle.
Transmission Oil Cooler - Installation
INSTALLATION
1. Position transmission oil/power steering cooler in vehicle.
2. Install transmission mounting bolts. Tighten to 14 Nm (123 in. lbs.)
3. Install transmission and power steering lines into cooler See: Steering and Suspension/Steering/Power Steering/Power Steering Fluid
Cooler/Service and Repair/Power Steering Fluid Cooler - Installation
4. Install grille See: Body and Frame/Grille/Service and Repair/Grille - Installation.
