Commander 2WD V8-4.7L (2008)
12. Apply approximately a 10 mm (0.4 in.) wide bead of adhesive with a triangular nozzle approximately 6 mm (0.230 in.) from the edge of the glass
starting at the bottom center of the quarter glass.
13. Run the end of the adhesive bead on the quarter glass parallel to the start of the bead and smooth the ends flush.
14. Place the quarter glass into the window opening (2) and insert mounting studs through the holes in the window fence.
15. Install the headliner.
16. Install the quarter panel trim . See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Quarter Panel Trim/Quarter Trim
Panel - Installation
