Commander 2WD V8-4.7L Flex Fuel (2009)
appropriate text and International Control and Display Symbol icons. Several of the push buttons feature Light Emitting Diode (LED) units to give the
vehicle operator an indication when the function of that switch is currently active. Only the hazard warning switch push button latches, the manual
headlamp leveling switch features a thumbwheel with four detent positions, while the remaining switches feature momentary operation.
Four screws secure the switch to the back of the instrument panel center bezel through integral mounting tabs that are molded onto each end of the switch
housing. The back of the switch housing has an integral connector receptacle containing terminal pins that connect the switch to the vehicle electrical
system through a dedicated take out and connector of the instrument panel wire harness.
Panel lamps dimmer controlled illumination lamps integral to the circuit board within the switch provide back lighting for visibility at night, but these
lamps are not serviceable. The individual switches in the upper instrument panel switch pod cannot be repaired and are not serviced individually. If any
component within the switch pod is ineffective or damaged, the entire upper switch pod must be replaced.
