Commander 2WD V8-4.7L Flex Fuel (2009)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Fascia - Removal
REMOVAL
1. Remove the rivets attaching the rear flare (3) to the wheel liner.
2. Separate the clips (4) attaching the rear flare to the rear fascia (1) and quarter panel (2).
3. Remove the rear flare.
4. Open the liftgate.
5. Remove the four push pin fasteners (1) and 2 screws (2) at the step pad area.
