Commander 2WD V8-4.7L Flex Fuel (2009)
Front Door Hinge: Service and Repair
Front Door Hinge - Removal
REMOVAL
1. Remove the door. See: Service and Repair/Front Door - Removal
2. Using a grease pencil or equivalent, mark the location of the door hinges (2 and 3) on the front door.
NOTE: The epoxy bonded washers do not need to be separated from the door hinges. If the washers are removed, the door may need to be
readjusted.
3. Remove the four nuts (4) that secure the front door hinges to the door and remove the hinges.
4. If required, remove the washers (1) from the front door hinges.
