Commander 2WD V8-4.7L Flex Fuel (2009)
Front Door Latch: Service and Repair
Front Door Latch - Installation
INSTALLATION
1. If removed, install the actuator rods onto the front door latch (1) and engage the retainers.
2. Position the front door latch and actuator rods into the door as an assembly.
3. Install the three bolts (4) that secure the front door latch to the door.
4. Tighten the bolts to 10.5 Nm (95 in. lbs.) using the sequence shown.
5. Connect the door wire harness connector to the front door latch.
6. Install the interior handle actuator rod onto the front door latch and engage the retainer.