Commander 2WD V8-4.7L Flex Fuel (2009)
18. Remove the outer bolt (2 and 3) and disconnect the track bar (1).
19. Separate the exhaust hangers (1 and 2) and support the exhaust.
20. Using a grease pencil or equivalent, mark the location of the body cradle (3) on the underbody to aid installation.
21. Support the cradle (3) with a suitable lifting device.
22. Remove the upper cradle bolts (2).
23. Remove the side cradle bolt (1).
24. Remove the rail bolts (4) and remove the cradle (3).
