Commander 2WD V8-4.7L Flex Fuel (2009)
Carpet: Service and Repair
Carpet - Removal
REMOVAL
1. Remove the second row seats See: Seats/Service and Repair/Seat, Front/Seat - Removal.
2. Remove the third row seats See: Seats/Service and Repair/Seat, Front/Seat - Removal.
3. Remove the rear quarter trim panels See: Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim Panel-Removal.
4. Remove the lower B-pillar trim See: Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim Panel-Removal
5. Remove the cowl trim panels See: Trim Panel/Service and Repair/Cowl Trim Panel - Removal
6. Remove the sill covers See: Scuff Plate/Service and Repair/Scuff Plate - Removal
7. Remove the front seats See: Seats/Service and Repair/Seat, Front/Seat - Removal.
8. Remove the floor console, See: Console/Service and Repair/Floor Console - Removal.
9. Remove the fasteners and position the modules aside.
10. Remove the nut (2) and remove the module housing (1).
11. Remove the front carpet.
