Commander 2WD V8-4.7L Flex Fuel (2009)
2. On 2005-2006 vehicles, twist the springs (2) off the latch legs (1) and remove the latch(es) (3).
3. On 2007 and later vehicles, release the tabs (2) on the load floor latch(es) (1) and separate from the load floor (3).
Load Floor Latch - Installation
INSTALLATION
1. Install new latches (1) through the load floor hole (2) and seat the clips (3) fully.
2. Install the load floor, See: Load Floor - Installation.
Quarter Trim Panel - Removal
REMOVAL
