Commander 2WD V8-4.7L Flex Fuel (2009)
PASSENGER POWER SEAT SWITCH CONTINUITY
DRIVER WITH MEMORY SEAT SYSTEM
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat See: Service and Repair/Power Seat Switch - Removal.
3. Use an ohmmeter to test the resistance of the power seat switch. Refer to DRIVER POWER SEAT SWITCH WITH MEMORY SEAT
SYSTEM CONTINUITY table. If not OK, replace the faulty power seat switch. If switch tests OK See: Testing and Inspection/Component Tests
and General Diagnostics.
DRIVER POWER SEAT SWITCH WITH MEMORY SEAT SYSTEM CONTINUITY